NSN 5306-01-219-5929
Wheel Bolt
Between 2.640 inches and 2.687 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN4CH25A for national stock number 5306012195929.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-219-5929.
-
MPN or Model
AN4CH25A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.436 inches and 0.515 inches -
Fastener Length
Between 2.640 inches and 2.687 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Hole Diameter
Between 0.046 inches and 0.056 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.172 inches and 2.204 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-140-9596 MPN NAS1388-2Conductor Splice
- 5305-00-007-1588 MPN NAS1102E02-6PMachine Screw
- 5305-00-038-8396 MPN MS16208-136Hexagon Head Cap Screw
- 5305-00-052-6941 MPN NAS1351C3-36Socket Head Cap Screw
- 5305-00-052-8878 MPN MS24630-9Tapping Screw
- 5305-00-053-1082 MPN MS35199-46Machine Screw
- 5305-00-058-7612 MPN MS24694S132Machine Screw
- 5305-00-058-9365 MPN MS51977-22Setscrew
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-219-5929 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN4CH25A | National Aerospace Standards |
AN4CH25A | Aeronautical Standards Group |