NSN 5306-01-219-5937
Coaxial Connector
Between 2.117 inches and 2.147 inches fastener length, spline drive shear head head style, 0.210 inches head height, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number VS3133L6-25 for national stock number 5306012195937.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-219-5937.
-
MPN or Model
VS3133L6-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.545 inches and 0.595 inches -
Fastener Length
Between 2.117 inches and 2.147 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Head Minor Diameter
Between 0.578 inches and 0.585 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-105-9373 MPN 3M926-3L2Close Tolerance Screw
- 5305-01-131-2209 MPN ST3M454-6L16Close Tolerance Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5306-01-043-1871 MPN VEP220121-5VH22Shear Bolt
- 5306-01-046-0505 MPN VAL23608-3-36Shoulder Bolt
- 5306-01-054-1638 MPN BACB30NF5-52Close Tolerance Bolt
- 5306-01-141-7877 MPN ST3M507-4D5Shoulder Bolt
- 5306-01-212-3454 MPN BACB30LM4H4Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-219-5937 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3133L6-25 | Arconic Global Fasteners & Rings, |
VCG0009L6-25 | Valley-todeco, Inc. |
H411L6-25 | Huck International, Inc. |
VCG00009L6-25 | Valley-todeco, Inc. |
AIC596L6-25 | Sps Technologies, Llc |
PBF7521L6-25 | Sps Technologies, Llc |
12097L6-25 | Sps Technologies, Llc |
C7521L6-25 | Lockheed Martin Corporation |
C7521L6-25 | Sps Technologies, Llc |
H411L6-25 | Huck Intl Inc |
VS3133L6-25 | Alcoa Global Fasteners, Inc. |