NSN 5306-01-219-7648
Wheel Bolt
Between 1.001 inches and 1.047 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number MS21095-6006 for national stock number 5306012197648.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-219-7648.
-
MPN or Model
MS21095-6006
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.682 inches -
Fastener Length
Between 1.001 inches and 1.047 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Locking Feature
Patch threads or pellet threads or strip threads -
Thread Diameter
0.375 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-068-3643 MPN MS35834-414Film Fixed Resistor
- 5975-00-111-3208 MPN MS3367-5NNElectrical Components Tiedown Strap
- 5935-00-122-2788 MPN MS3470L14-19SWElectrical Receptacle Connector
- 5940-00-143-4771 MPN MS25036-102Lug Terminal
- 5935-00-156-6021 MPN MS3106F28-16SWElectrical Plug Connector
- 5935-00-163-3643 MPN MS27473T18A32PElectrical Plug Connector
- 5935-00-189-2520 MPN MS3416-16ENElectrical Connector Backshell
- 5905-00-192-4490 MPN MS35043-51Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-219-7648 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-6006 | Military Standards |