NSN 5306-01-220-8674
Coaxial Connector
Between 1.128 inches and 1.158 inches fastener length, spline extended washer head style, between 0.195 inches and 0.215 inches head height, extended washer diameter: between 0.349 inches and 0.359 inches .
Manufacturer part number MS21134-03012 for national stock number 5306012208674.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-220-8674.
-
MPN or Model
MS21134-03012
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.368 inches and 0.418 inches -
Fastener Length
Between 1.128 inches and 1.158 inches -
Head Style
Spline extended washer -
Head Height
Between 0.195 inches and 0.215 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Head Minor Diameter
Between 0.253 inches and 0.259 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-008-7855 MPN NAS1100C04-22PMachine Screw
- 5305-00-045-3179 MPN MS24694S102Machine Screw
- 5305-00-052-6919 MPN MS24629-52Tapping Screw
- 5305-00-059-4538 MPN MS35190-12Machine Screw
- 5305-00-127-5685 MPN NAS1152V3Close Tolerance Screw
- 5305-00-225-8477 MPN MS24693-S146Machine Screw
- 5305-00-225-8513 MPN MS90725-49Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-220-8674 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-03012 | National Aerospace Standards |
MS21134-03012 | Military Standards |