1-321-802-5889
Email Us

NSN 5306-01-224-1738

Close Tolerance Hex Head Bolt

About this product

Between 6.450 inches and 6.480 inches fastener length, undercut hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: 0.836 inches .

Manufacturer part number NAS6208-96D for national stock number 5306012241738.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-224-1738.

  • MPN or Model

    NAS6208-96D

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.528 inches
  • Fastener Length
    Between 6.450 inches and 6.480 inches
  • Head Style
    Undercut hexagon
  • Head Height
    Between 0.250 inches and 0.265 inches
  • Width Between Flats
    0.836 inches
  • Grip Diameter
    Between 0.4945 inches and 0.4950 inches
  • Shank Unthreaded Hole Diameter
    0.141 inches and 0.151 inches first hole
  • Thread Diameter
    0.5000 inches
  • Grip Length
    Between 5.927 inches and 5.947 inches
  • Thready Qty Per Inch (tpi)
    20
  • Min. Tensile Strength (psi)
    1600000 pounds per square inch
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    6.267 inches all holes
  • Material
    Steel
  • Surface Treatment
    Chromate
  • Surface Treatment Specification
    Qq-p-416 ty2 cl2 federal specification single treatment response
  • Thread Series Designator
    Unjf
  • Specification Data
    80205-nas6208-95d professional/industrial association standard
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-224-1738 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306012241738

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
NAS6208-96D National Aerospace Standards
NAS1108-96DW National Aerospace Standards
Stock Check
Availability for this item was last checked on 05/28/22. The quantities and conditions available at the time were:
  • AR: 1
  • NS: 1
  • NE: 26