NSN 5306-01-224-5974
Coaxial Connector
Between 2.732 inches and 2.782 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LM4-37 for national stock number 5306012245974.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-224-5974.
-
MPN or Model
BACB30LM4-37
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.410 inches and 0.440 inches -
Fastener Length
Between 2.732 inches and 2.782 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.322 inches and 2.342 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30l-4-37 manufacturers standard
More from these suppliers
- 5945-00-009-2812 MPN 25-66554-7Electromagnetic Relay
- 5940-00-082-4662 MPN BACT42C24-2Terminal Board
- 1560-00-306-9161 MPN 3-57966-2Spider Ball Fairing
- 1560-00-567-8290 MPN 69-8996-13Aircraft Structural Panel
- 1560-00-604-6708 MPN 69-3458-1Valve Door Seal Retainer
- 1560-00-608-3780 MPN 50-2606-1Air Ejector Duct
- 1560-00-610-8363 MPN 66-5400-1Engine Backing Ring
- 1560-00-610-8379 MPN 9-65126-14Aircraft Access Cover
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-224-5974 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM4-37 | The Boeing Company |
BACB30LM4-37 | The Boeing Company |