NSN 5306-01-225-7700
Wheel Bolt
Between 2.922 inches and 2.969 inches fastener length, hexagon head style, between 0.453 inches and 0.485 inches head height, width between flats: between 1.240 inches and 1.253 inches .
Manufacturer part number AN14-26A for national stock number 5306012257700.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-225-7700.
-
MPN or Model
AN14-26A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.218 inches and 1.297 inches -
Fastener Length
Between 2.922 inches and 2.969 inches -
Head Style
Hexagon -
Head Height
Between 0.453 inches and 0.485 inches -
Width Between Flats
Between 1.240 inches and 1.253 inches -
Thread Diameter
0.875 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-192-1502 MPN AN3101A20-29SElectrical Plug Connector
- 5935-00-196-4639 MPN AN3102A24-22PElectrical Receptacle Connector
- 5975-00-280-3450 MPN AN3060-10Electrical Box Connector
- 5935-00-283-2947 MPN AN3108B24-7SElectrical Plug Connector
- 5305-00-151-3341 MPN AN526DD1032-14Machine Screw
- 5305-00-156-2357 MPN AN509-8R10REV2Machine Screw
- 5305-00-281-8896 MPN AN520C10R16Machine Screw
- 5305-00-527-5436 MPN AN565FC4H2Setscrew
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-225-7700 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN14-26A | Aeronautical Standards Group |