NSN 5306-01-225-9645
Coaxial Connector
Between 3.825 inches and 3.855 inches fastener length, dished hexagon head style, between 0.281 inches and 0.296 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number NAS2909-48 for national stock number 5306012259645.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-225-9645.
-
MPN or Model
NAS2909-48
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.815 inches and 0.865 inches -
Fastener Length
Between 3.825 inches and 3.855 inches -
Head Style
Dished hexagon -
Head Height
Between 0.281 inches and 0.296 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5761 inches and 0.5771 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 2.990 inches and 3.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas2909 professional/industrial association standard
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A12-313Terminal Board Marker Strip
- 5940-00-833-5836 MPN NAS1063A2-801Terminal Board Marker Strip
- 5940-01-425-6505 MPN NAS1063A20-335Terminal Board Marker Strip
- 5305-00-055-2036 MPN MS24694C346Machine Screw
- 5305-00-059-3666 MPN MS51958-70Machine Screw
- 5305-00-107-9221 MPN NAS1133E6Close Tolerance Screw
- 5305-00-116-5021 MPN NAS1100C04-4Machine Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-225-9645 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2909-48 | National Aerospace Standards |