NSN 5306-01-226-8722
Coaxial Connector
Between 4.015 inches and 4.045 inches fastener length, double hexagon w/hole head style, 0.276 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number LD111-0021-0555 for national stock number 5306012268722.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-226-8722.
-
MPN or Model
LD111-0021-0555
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.578 inches and 0.608 inches -
Fastener Length
Between 4.015 inches and 4.045 inches -
Head Style
Double hexagon w/hole -
Head Height
0.276 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
0.082 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
3.437 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-032-3345 MPN 140-33619-12Landing Gear Rele Lever Assembly
- 1560-00-048-2796 MPN 88-31858Glass
- 1560-00-122-8436 MPN 151-31815Canopy Front Truck Assembly
- 1560-00-156-8785 MPN 88-42005-6Engi Clamp Assembly
- 1560-00-192-6009 MPN 151-34116Trunnion Bearing
- 1560-00-732-9826 MPN 265-170007-3Aircraft Structural Component Bracket
- 1560-00-732-9830 MPN 265-170009-3Aircraft Structural Component Bracket
- 1560-00-960-0729 MPN 246-34260Landing Gear Uplock Arm
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-226-8722 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0555 | Boeing Company, The |