NSN 5306-01-227-3157
Coaxial Connector
Finish-clean and passivate per qq-p-35;washer face dia. .335in.;dia. Before plating .188in.;dia. After plating .189;threaded length .338in.;total length .776;180 ksi;flat end.
Manufacturer part number NAS1953C7 for national stock number 5306012273157.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-227-3157.
-
MPN or Model
NAS1953C7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Hexagon -
Width Between Flats
0.376 inches -
Thread Diameter
0.190 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-625-6038 MPN NAS1063F-1-2Terminal Board Marker Strip
- 5305-00-054-9328 MPN MS24694C342Machine Screw
- 5305-00-068-5393 MPN MS24667-4Socket Head Cap Screw
- 5305-00-082-1760 MPN MS21287-02Machine Screw
- 5305-00-093-6741 MPN NAS1352-4LE16PSocket Head Cap Screw
- 5305-00-152-5653 MPN MS24693C104Machine Screw
- 5305-00-225-9093 MPN NASM90726-38Hexagon Head Cap Screw
- 5305-00-257-1899 MPN MS27039DD0815Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-227-3157 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1953C7 | National Aerospace Standards |
NAS1953C7 | National Aerospace Standards |
NAS1953C7 | National Aerospace Standards |
NAS1953C7 | National Aerospace Standards |
NAS1953C7 | National Aerospace Standards |
NAS1953C7 | National Aerospace Standards |