NSN 5306-01-227-9085
Close Tolerance Hex Head Bolt
Between 109.5 millimeters and 111.0 millimeters fastener length, hexagon head style, between 6.17 millimeters and 6.63 millimeters head height, width between flats: between 14.70 millimeters and 15.00 millimeters .
Manufacturer part number 15544950 for national stock number 5306012279085.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-227-9085.
-
MPN or Model
15544950
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Direction
Right-hand -
Thread Length
6.0 millimeters -
Fastener Length
Between 109.5 millimeters and 111.0 millimeters -
Head Style
Hexagon -
Head Height
Between 6.17 millimeters and 6.63 millimeters -
Width Between Flats
Between 14.70 millimeters and 15.00 millimeters -
Grip Diameter
Between 9.8900 millimeters and 10.0000 millimeters -
Thread Diameter
10.0 millimeters -
Grip Length
90.00 millimeters -
Thread Pitch In Millimeters
1.5 -
External Thread Tolerance Class
6g -
Material
Steel -
Material Specification
Gm 500-m fscm 11862 mfr ref single material response -
Surface Treatment
Zinc -
Surface Treatment Specification
Gm 4342-m 20d48 fscm 11862 mfr ref single treatment response -
Thread Series Designator
M
More from these suppliers
- 5930-00-998-9211 MPN 1993353Push Switch
- 4820-01-096-6780 MPN 18000139Safety Relief Valve
- 5306-01-149-4398 MPN 11500914Machine Bolt
- 4820-01-043-8800 MPN CV785CCheck Valve
- 4820-01-149-4945 MPN 2485247Check Valve
- 5930-01-158-4808 MPN 14072339Toggle Switch
- 5975-01-202-4110 MPN 2388568Junction Box
- 5930-00-233-6725 MPN 1390517Push-pull Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-227-9085 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
15544950 | General Motors Llc |
15544950 | General Motors Corp |