1-321-802-5889
Email Us

NSN 5306-01-228-6799

Close Tolerance Hex Head Bolt

About this product

Retaining element in shank.

Manufacturer part number 106467-8-17 for national stock number 5306012286799.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-228-6799.

  • MPN or Model

    106467-8-17

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.646 inches and 0.650 inches
  • Fastener Length
    Between 1.708 inches and 1.728 inches
  • Head Style
    Dished hexagon
  • Head Height
    Between 0.251 inches and 0.266 inches
  • Width Between Flats
    0.840 inches
  • Grip Diameter
    Between 0.4982 inches and 0.4991 inches
  • Shank Unthreaded Hole Diameter
    0.106 inches and 0.116 inches first hole
  • Thread Diameter
    0.500 inches
  • Grip Length
    Between 1.062 inches and 1.078 inches
  • Thready Qty Per Inch (tpi)
    20
  • Min. Tensile Strength (psi)
    95000 pounds per square inch
  • Hardness Rating
    36.0 rockwell c and 36.0 rockwell c
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.598 inches and 1.608 inches first hole
  • Surface Finish
    63.0 microinches grip
  • Material
    Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130
  • Material Specification
    Mil-s-5000 military specification single material response or mil-s-5626 military specification single material response or mil-s-6049 military specification single material response or mil-s-6758 military specification single material response
  • Surface Treatment
    Passivate
  • Surface Treatment Specification
    Qq-p-35 military specification single treatment response
  • Thread Series Designator
    Unjf
  • Specification Data
    96906-ms27576-8-17 government standard
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-228-6799 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306012286799

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
106467-8-17 Sps Technologies, Llc
MS27576-8-17 National Aerospace Standards
MS27576-8-17 Military Standards
Stock Check
Availability for this item was last checked on 01/11/22. The quantities and conditions available at the time were:
  • NS: 7
  • NE: 357