NSN 5306-01-229-3482
Close Tolerance Hex Head Bolt
Between 1.013 inches and 1.060 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 3M261-5-9 for national stock number 5306012293482.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-229-3482.
-
MPN or Model
3M261-5-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.013 inches and 1.060 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3112 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Material Specification
23-105, cage76301 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mac p.S. 13145, cage76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-025-4068 MPN 51B600C3-12BMachine Screw
- 5305-00-146-2687 MPN HIC1023V6-18Close Tolerance Screw
- 5305-00-146-7190 MPN AIC1023V5-7Close Tolerance Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-00-969-4761 MPN AIC1351-023Socket Head Cap Screw
- 5305-01-004-6893 MPN 51B600C06-12BMachine Screw
- 5305-01-015-9679 MPN AIC209-1Socket Head Cap Screw
- 5305-01-054-6257 MPN AIC985-3-10PClose Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-229-3482 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M261-5-9 | Boeing Company, The |
AIC261M5-9 | Sps Technologies, Llc |
HS2601-5Z-9A | Huck International, Inc. |
66051-5-9 | Sps Technologies, Llc |
VS2938-5-9 | Alcoa Global Fasteners, Inc. |
HS2601-5Z-9A | Huck Intl Inc |
66051-5-9 | Tyco Electronics Corporation |
66051-5-9 | Boeing Company, The |