NSN 5306-01-229-7125
Close Tolerance Hex Head Bolt
Retaining element in shank.
Manufacturer part number 106467-8-33 for national stock number 5306012297125.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-229-7125.
-
MPN or Model
106467-8-33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.646 inches and 0.650 inches -
Fastener Length
Between 2.708 inches and 2.728 inches -
Head Style
Dished hexagon -
Head Height
Between 0.251 inches and 0.266 inches -
Width Between Flats
0.840 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 2.062 inches and 2.078 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.598 inches and 2.608 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 4130 -
Material Specification
Mil-s-5000 military specification single material response or mil-s-5626 military specification single material response or mil-s-6049 military specification single material response or mil-s-6758 military specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 military specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
96906-ms27576-8-33 government standard
More from these suppliers
- 5940-01-425-6040 MPN NAS1063A15-435Terminal Board Marker Strip
- 5305-00-009-9193 MPN NAS1218-06E2Machine Screw
- 5305-00-023-0054 MPN NAS560HK3-27Machine Screw
- 5305-00-052-7532 MPN MS24617-59Tapping Screw
- 5305-00-058-4009 MPN MS24694S117Machine Screw
- 5305-00-069-3016 MPN NAS514-632-8Machine Screw
- 5305-00-082-6738 MPN MS51959-112Machine Screw
- 5305-00-104-5078 MPN NAS1352-6LE64PSocket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-229-7125 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-8-33 | Sps Technologies, Llc |
MS27576-8-33 | National Aerospace Standards |
MS27576-8-33 | Military Standards |