NSN 5306-01-229-9597
Close Tolerance Hex Head Bolt
Two holes spaced ninety degrees apart.
Manufacturer part number SS5115-4-15 for national stock number 5306012299597.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-229-9597.
-
MPN or Model
SS5115-4-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.309 inches and 0.360 inches -
Fastener Length
Between 1.383 inches and 1.403 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches all holes -
Thread Diameter
0.250 inches -
Grip Length
Between 0.938 inches and 0.954 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.118 inches and 1.159 inches all holes -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-143-9689 MPN NAS1146-12Close Tolerance Screw
- 5305-00-151-9930 MPN SFT22-5A22Close Tolerance Screw
- 5305-00-833-6222 MPN 10-24NCX3-8Setscrew
- 5305-00-855-7964 MPN NAS1123C2Close Tolerance Screw
- 5305-01-058-1234 MPN 121558-3-A2PClose Tolerance Screw
- 5305-01-097-8220 MPN HT4067-4-6AClose Tolerance Screw
- 5305-01-101-3328 MPN HT4068-6-16Close Tolerance Screw
- 5305-01-138-7226 MPN NAS1101-4-13Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-229-9597 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5115-4-15 | Sikorsky Aircraft Corporation |
SS5115-4-15 | Sps Technologies, Llc |
SS5115-4-15 | Sps Technologies, Llc |