NSN 5306-01-230-3366
Close Tolerance Hex Head Bolt
Two holes spaced ninety degrees apart.
Manufacturer part number SS5115-5-57 for national stock number 5306012303366.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-230-3366.
-
MPN or Model
SS5115-5-57
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.302 inches and 0.369 inches -
Fastener Length
Between 4.031 inches and 4.051 inches -
Head Style
Dished hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches and 0.086 inches all holes -
Thread Diameter
0.312 inches -
Grip Length
Between 3.562 inches and 3.578 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.757 inches and 3.814 inches all holes -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-058-2571 MPN 320574-2Setscrew
- 5305-00-178-8215 MPN 38038E-98C-6DScrew
- 5305-00-501-9998 MPN LS15237-4-35DClose Tolerance Screw
- 5305-00-680-5429 MPN NAS1204-52Close Tolerance Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-105-1142 MPN ST3M733-3L3Close Tolerance Screw
- 5305-01-155-9781 MPN 20098-96C-5Socket Head Cap Screw
- 5305-01-181-6100 MPN 12705L-8C-32Shoulder Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-230-3366 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5115-5-57 | Sikorsky Aircraft Corporation |
SS5115-5-57 | Sps Technologies, Llc |