NSN 5306-01-230-5188
Coaxial Connector
Between 1.297 inches and 1.327 inches fastener length, double hexagon w/hole head style, 0.234 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number LD111-0020-0413 for national stock number 5306012305188.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-230-5188.
-
MPN or Model
LD111-0020-0413
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.485 inches and 0.515 inches -
Fastener Length
Between 1.297 inches and 1.327 inches -
Head Style
Double hexagon w/hole -
Head Height
0.234 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
0.069 inches -
Hole Diameter
Between 0.034 inches and 0.042 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.812 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-364-7308 MPN LS15267V3-20Machine Screw
- 5305-01-048-3253 MPN BACB30LU2-12Close Tolerance Screw
- 5305-01-055-3807 MPN BACB30LU6-8Close Tolerance Screw
- 5305-01-435-9139 MPN BACB30LH3-12Close Tolerance Screw
- 5305-01-513-8806 MPN VCL0010-6-7Close Tolerance Screw
- 5306-00-685-8038 MPN 385261Machine Bolt
- 5306-00-754-1757 MPN BACB30FD4-20Shear Bolt
- 5306-01-044-2976 MPN VAL23607-5-9Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-230-5188 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0020-0413 | Boeing Company, The |
LD111-0020-0413 | Valley-todeco, Inc. |
LD111-0020-0413 | Sps Technologies, Llc |
LD111-0020-0413 | Sps Technologies, Llc |
LD111-0020-0413 | Sonic Industries Inc. |
LD111-0020-0413 | Sps Technologies, Llc |
LD111-0020-0413 | Hi-shear Corporation |
LD111-0020-0413 | Sps Technologies, Llc |
Stock Check
- NE: 265
- NS: 21