NSN 5306-01-230-7419
Coaxial Connector
Between 0.972 inches and 1.992 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number 5544136-20 for national stock number 5306012307419.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-230-7419.
-
MPN or Model
5544136-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
095190 - Hardware, NOI Sub 9 -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.420 inches and 0.430 inches -
Fastener Length
Between 0.972 inches and 1.992 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-026-8360 MPN 325735PC2Stuffing Tube
- 5945-00-062-5662 MPN 2661905Electromagnetic Relay
- 5905-00-160-6148 MPN 2696242PT385Film Fixed Resistor
- 5940-00-180-7768 MPN 5624715Lug Terminal
- 5905-00-259-1576 MPN 95005-6202-2337PCIED9720Nonprecision Wire Wound Variable Resistor
- 4820-00-375-7546 MPN 312067PCCValve Seat
- 5905-00-452-0769 MPN 1791367-269Film Fixed Resistor
- 4820-00-768-0494 MPN 585-208-1716472Float Valve
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-230-7419 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
5544136-20 | Naval Sea Systems Command |