NSN 5306-01-233-2355
Wheel Bolt
Between 0.122 inches and 0.182 inches fastener length, double hexagon w/hole head style, 0.250 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS9696-11 for national stock number 5306012332355.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-233-2355.
-
MPN or Model
MS9696-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.812 inches -
Fastener Length
Between 0.122 inches and 0.182 inches -
Head Style
Double hexagon w/hole -
Head Height
0.250 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.062 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
175000 pounds per square inch -
Hardness Rating
34.0 rockwell c and 44.0 rockwell c -
Minimum Yield Strength
115000 pounds per square inch -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-044-3514 MPN MS25201-2Toggle Switch
- 5935-00-051-7911 MPN MS3100K28-22PElectrical Receptacle Connector
- 5940-00-082-4642 MPN MS18029-15-3Terminal Board Cover
- 5930-00-088-4675 MPN MS16656-2Toggle Switch
- 5935-00-090-7057 MPN MS3152R18Electrical Connector Cable Clamp
- 5935-00-105-5492 MPN MS3137E12-50PCElectrical Plug Connector
- 5935-00-149-3845 MPN MS3106A28-2PElectrical Plug Connector
- 5935-00-186-1530 MPN MS3106F20-15SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-233-2355 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9696-11 | Military Standards |