NSN 5306-01-234-3081
Close Tolerance Hex Head Bolt
Between 1.640 inches and 1.687 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN174CH15A for national stock number 5306012343081.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-234-3081.
-
MPN or Model
AN174CH15A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.436 inches and 0.515 inches -
Fastener Length
Between 1.640 inches and 1.687 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Hole Diameter
Between 0.046 inches and 0.056 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.172 inches and 1.204 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Surface Finish
63.0 microinches grip -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-266-1984 MPN AN3050-10Electrical Conduit Ferrule
- 5935-00-643-6718 MPN AN3102E16S1SElectrical Receptacle Connector
- 5935-00-248-5839 MPN AN3100A16S1PWElectrical Receptacle Connector
- 5925-00-104-5761 MPN AN3160-50Circuit Breaker
- 5305-00-082-6788 MPN AN505DD416R11Machine Screw
- 5305-00-151-0384 MPN AN500A6-14Machine Screw
- 5305-00-156-2600 MPN AN510-10R40Machine Screw
- 5305-00-533-5542 MPN AN550-8R8Wood Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-234-3081 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174CH15A | Aeronautical Standards Group |
932.19.60.814 | Pilatus Aircraft Ltd |
AN174C15A | Aeronautical Standards Group |