NSN 5306-01-234-9403
Coaxial Connector
Two holes 90 degrees apart.
Manufacturer part number S343-12DD56 for national stock number 5306012349403.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-234-9403.
-
MPN or Model
S343-12DD56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.927 inches and 1.052 inches -
Fastener Length
Between 3.485 inches and 3.515 inches -
Head Style
Spline extended washer -
Head Height
Between 0.472 inches and 0.512 inches -
Width Between Flats
Between 0.222 inches and 0.227 inches -
Extended Washer Diameter
Between 1.384 inches and 1.394 inches -
Extended Washer Thickness
Between 0.098 inches and 0.118 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Shank Unthreaded Hole Diameter
0.141 inches all holes and 0.146 inches all holes -
Thread Diameter
0.750 inches -
Grip Length
Between 2.438 inches and 2.458 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.267 inches all holes and 3.307 inches all holes -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5148 MPN ST3M455-4L6-1Close Tolerance Screw
- 5305-01-129-4432 MPN SC2671-3-11Machine Screw
- 5306-00-969-3161 MPN VFK100G-04040Shear Bolt
- 5306-01-023-9005 MPN 6871521-18Machine Bolt
- 5306-01-054-3423 MPN VCG0009L6-20Shear Bolt
- 5306-01-054-3426 MPN VCG0009L7-15Shear Bolt
- 5306-01-056-5442 MPN BACB30LM4-15Shear Bolt
- 5306-01-142-9891 MPN VAL23607-4D6Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-234-9403 shear boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| S343-12DD56 | Huck International, Inc. |
| VS3190-12DD56 | Arconic Global Fasteners & Rings, |
| VFK600-12DD56 | Valley-todeco, Inc. |
| AIC763-12DD56 | Sps Technologies, Llc |
| PBF1267-12DD56 | Sps Technologies, Llc |
| 122897-12DD56 | Sps Technologies, Llc |
| MB156-12DD56 | Hi-shear Corporation |
| ST3M753-12DD56 | Boeing Company, The |
| ST3M753-12DD56 | Alcoa Global Fasteners, Inc. |
| MB156-12DD56 | Lisi Aerospace Canada Corp |
| S343-12DD56 | Huck Intl Inc |
| VS3190-12DD56 | Alcoa Global Fasteners, Inc. |
| 10116168 | Nimikkeistokeskus Ncb Finland |
| GS1032-12DD56 | B & B Specialties Inc. |
Stock Check
