NSN 5306-01-235-6452
Close Tolerance Hex Head Bolt
Between 7.914 inches and 7.934 inches fastener length, crowned hexagon head style, between 0.189 inches and 0.204 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number MS27576-6-118 for national stock number 5306012356452.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-235-6452.
-
MPN or Model
MS27576-6-118
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.357 inches and 0.439 inches -
Fastener Length
Between 7.914 inches and 7.934 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.189 inches and 0.204 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Locking Feature
Detent ring grip -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 7.375 inches and 7.391 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
7.799 inches first hole and 7.829 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 8740 or steel comp 4140 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-508-0291 MPN NAS543-2ASwitch
- 5935-00-779-8222 MPN NAS1196-13Electrical Connector Shell
- 5940-01-354-9986 MPN NAS1063A12-1001Terminal Board Marker Strip
- 5940-01-425-6039 MPN NAS1063A5-434Terminal Board Marker Strip
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5940-01-652-3069 MPN NAS1063A2-107DNTerminal Board Marker Strip
- 5305-00-007-2962 MPN NAS1743C3T14Socket Head Cap Screw
- 5305-00-051-6981 MPN MS27039DD4-28Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-235-6452 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-6-118 | National Aerospace Standards |
MS27576-6-118 | Military Standards |