NSN 5306-01-236-1589
Shouldered Rivet Ring Bolt
About this product
Between 0.250 inches and 0.253 inches eye inside diameter, 0.094 inches shoulder thickness, between 0.953 inches and 1.000 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN44C7A for national stock number 5306012361589.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-236-1589.
-
MPN or Model
AN44C7A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.432 inches and 0.562 inches -
Eye Inside Diameter
Between 0.250 inches and 0.253 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 0.953 inches and 1.000 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.625 inches -
Overall Length
Between 1.843 inches and 1.890 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 1.463 inches and 1.531 inches -
Eye Outside Width
0.625 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-008-9116 MPN NAS1190E04T3LSocket Head Cap Screw
- 5305-00-059-2483 MPN MS51976-2Setscrew
- 5305-00-115-6187 MPN MS21097-3014Socket Head Cap Screw
- 5305-00-138-9907 MPN NAS1133V34Close Tolerance Screw
- 5305-00-145-0959 MPN MS27039DD1-11Machine Screw
- 5305-00-150-9268 MPN MILS7839Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-236-1589 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN44C7A | National Aerospace Standards |
AN44C7A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.