NSN 5306-01-236-6177
Wheel Bolt
Adjusting slot thread end.
Manufacturer part number NAS428KH3-5 for national stock number 5306012366177.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-236-6177.
-
MPN or Model
NAS428KH3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.563 inches and 0.596 inches -
Fastener Length
Between 0.625 inches and 0.627 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.099 inches and 0.119 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Hole Diameter
Between 0.034 inches and 0.039 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.031 inches and 0.062 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 8740 or steel comp 4140 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas428 professional/industrial association standard
More from these suppliers
- 5935-00-160-2471 MPN NAS1666-16Electrical Connector Cable Clamp
- 5940-01-660-0089 MPN NAS1063Terminal Board Marker Strip
- 5305-00-007-0282 MPN NAS1100C08-12PMachine Screw
- 5305-00-012-0459 MPN MS27039DD0820Machine Screw
- 5305-00-053-1089 MPN MS35199-61Machine Screw
- 5305-00-053-9355 MPN MS35191-259Machine Screw
- 5305-00-066-7336 MPN NAS1191C02P10Socket Head Cap Screw
- 5305-00-079-1749 MPN MS24694S29Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-236-6177 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS428KH3-5 | National Aerospace Standards |