NSN 5306-01-236-7102
Close Tolerance Hex Head Bolt
Between 4.208 inches and 4.228 inches fastener length, dished hexagon head style, between 0.251 inches and 0.266 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number MS27576-8-57 for national stock number 5306012367102.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-236-7102.
-
MPN or Model
MS27576-8-57
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.401 inches and 0.546 inches -
Fastener Length
Between 4.208 inches and 4.228 inches -
Head Style
Dished hexagon -
Head Height
Between 0.251 inches and 0.266 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Locking Feature
Detent ring grip -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 3.562 inches and 3.578 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.088 inches first hole and 4.118 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 8740 or steel comp 4140 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-727-3107 MPN NAS704C2Stud Terminal
- 5935-01-256-0827 MPN NAS1678H10B6PNElectrical Plug Connector
- 5940-01-439-4149 MPN NAS1063A8-98KTerminal Board Marker Strip
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-008-7856 MPN NAS1742C04T6USocket Head Cap Screw
- 5305-00-051-7329 MPN NAS1352-4H16Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-236-7102 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-8-57 | National Aerospace Standards |
MS27576-8-57 | Military Standards |