NSN 5306-01-238-8877
Coaxial Connector
Chamfer on thd end 0.046 in. Min 0.078 in. Max at 45 deg angle; internal chamfer on thread end 0.187 in. At 60 deg angle.
Manufacturer part number MS21250-12034 for national stock number 5306012388877.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-238-8877.
-
MPN or Model
MS21250-12034
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.036 inches and 1.076 inches -
Fastener Length
Between 3.171 inches and 3.191 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.701 inches and 0.721 inches -
Width Between Flats
Between 0.802 inches and 0.822 inches -
Extended Washer Diameter
Between 1.220 inches and 1.230 inches -
Extended Washer Thickness
Between 0.168 inches and 0.188 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
16 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-004-2055 MPN MS24264R22T55PNXElectrical Receptacle Connector
- 5935-00-018-8796 MPN MS3103-22-14PWElectrical Receptacle Connector
- 5950-00-042-4694 MPN MS16225-10Radio Frequency Coil
- 5935-00-051-2292 MPN MS16014-1Plug-in Electronic Components Socket
- 5935-00-125-0719 MPN MS3119E18-32WConnector Adapter
- 5935-00-195-9139 MPN MS3108A10SL3SElectrical Plug Connector
- 5935-00-201-7294 MPN MS3106A16S1SZElectrical Plug Connector
- 5935-00-225-6472 MPN MS3108R20-18PElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-238-8877 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-12034 | Military Standards |