NSN 5306-01-239-3496
Wheel Bolt
Between 1.615 inches and 1.635 inches fastener length, hexagon head style, between 0.138 inches and 0.158 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS9491-22 for national stock number 5306012393496.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-239-3496.
-
MPN or Model
MS9491-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.865 inches and 0.945 inches -
Fastener Length
Between 1.615 inches and 1.635 inches -
Head Style
Hexagon -
Head Height
Between 0.138 inches and 0.158 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.690 inches and 0.750 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-004-0231 MPN MS27499E22A2SElectrical Receptacle Connector
- 5935-00-048-7749 MPN MS24266E14T7SElectrical Plug Connector
- 5950-00-062-5691 MPN MS16476-1Reactor
- 5905-00-104-8350 MPN MS35043-71Composition Fixed Resistor
- 5935-00-110-0347 MPN MS3108R22-22SXCElectrical Plug Connector
- 5940-00-115-5005 MPN MS20659-154Lug Terminal
- 5940-00-132-2761 MPN MS27212-1-10Terminal Board
- 5935-00-163-7115 MPN MS3456L14S7SXElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-239-3496 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9491-22 | Military Standards |