NSN 5306-01-242-4268
Coaxial Connector
Between 1.513 inches and 1.543 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6308-16 for national stock number 5306012424268.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-242-4268.
-
MPN or Model
NAS6308-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.503 inches and 0.553 inches -
Fastener Length
Between 1.513 inches and 1.543 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response and ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6308 professional/industrial association standard
More from these suppliers
- 5905-01-008-5287 MPN NAS1379P2NWirewound Fixed Resistor Network
- 5305-00-007-3019 MPN NAS1102C02-3PMachine Screw
- 5305-00-007-6174 MPN NAS1100E00-10Machine Screw
- 5305-00-051-0634 MPN MS90725-201Hexagon Head Cap Screw
- 5305-00-052-6879 MPN MS24627-55Tapping Screw
- 5305-00-052-9052 MPN MS24630-37Tapping Screw
- 5305-00-146-2524 MPN MS51850-86Tapping Screw
- 5305-00-167-3641 MPN AN525-416-24Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-242-4268 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6308-16 | National Aerospace Standards |
Stock Check
- NE: 393
- NS: 3