NSN 5306-01-243-5121
Coaxial Connector
Between 0.500 inches and 0.530 inches fastener length, double hexagon extended washer head style, between 0.200 inches and 0.214 inches head height, width between flats: between 0.277 inches and 0.290 inches .
Manufacturer part number BACB30LE3U4 for national stock number 5306012435121.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-243-5121.
-
MPN or Model
BACB30LE3U4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.390 inches -
Fastener Length
Between 0.500 inches and 0.530 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.200 inches and 0.214 inches -
Width Between Flats
Between 0.277 inches and 0.290 inches -
Extended Washer Diameter
Between 0.359 inches and 0.369 inches -
Extended Washer Thickness
Between 0.040 inches and 0.060 inches -
Grip Diameter
0.1890 inches -
End Application
Used on sentry f22 aircraft -
Thread Diameter
0.190 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-6950 MPN 107R3554-1Rotor Slider Guide Assembly
- 1560-00-115-9841 MPN 9-63895-3Aircraft Stiffener Rib
- 1560-00-123-9723 MPN 65-11602-8Aft Engine Fitting
- 1560-00-216-1297 MPN 9-44689Door Latch Arm
- 5950-00-256-2361 MPN NL71263-14-1Radio Frequency Coil
- 5940-00-280-4141 MPN BACT12C12Conductor Splice
- 1560-00-350-7987 MPN 50-6013-25Engine Nose Dome
- 4920-00-409-7690 MPN 9TE65-45412Scoop Access Plug
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-243-5121 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LE3U4 | The Boeing Company |