NSN 5306-01-244-5253
Coaxial Connector
Between 5.512 inches and 5.542 inches fastener length, dished hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS1310-74D for national stock number 5306012445253.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-244-5253.
-
MPN or Model
NAS1310-74D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.902 inches -
Fastener Length
Between 5.512 inches and 5.542 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.6226 inches and 0.6232 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 4.615 inches and 4.635 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Hole Configuration Style
Hexagon corners -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.200 inches first hole and 5.215 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Mil-b-7838 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6183 MPN NAS1100C04-13PMachine Screw
- 5305-00-057-3663 MPN NAS1352-6LB12PSocket Head Cap Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-082-6738 MPN MS51959-112Machine Screw
- 5305-00-088-9044 MPN MS35207-260Machine Screw
- 5305-00-139-7071 MPN MS35307-420Hexagon Head Cap Screw
- 5305-00-177-5453 MPN NAS1216-04-10Machine Screw
- 5305-00-225-7116 MPN NAS1172-2NClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-244-5253 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1310-74D | National Aerospace Standards |