NSN 5306-01-246-3839
Wheel Bolt
Shaft extention on top of head,1.125 dia. By 1.750 lg with an undercut,1.000 dia by 0.250 w,1.188 from end to center of undercut.
Manufacturer part number 58A117-B2 for national stock number 5306012463839.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-246-3839.
-
MPN or Model
58A117-B2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 5.333 inches and 5.500 inches -
Fastener Length
5.500 inches -
Head Style
Square -
Head Height
1.000 inches -
Width Between Flats
1.500 inches -
Thread Diameter
1.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
12 -
Hardness Rating
30.0 rockwell c and 35.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 1137 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-250-3035 MPN 247ASC0168-250Electrical Plug Connector
- 5905-00-481-8123 MPN 125AS257-51101EInductive Wire Wound Fixed Resistor
- 5935-01-033-5828 MPN 917AS701-6Electrical Receptacle Connector
- 5935-01-034-3473 MPN 604AS480-9Electrical Plug Connector
- 5905-01-049-0609 MPN 704AS7215-43Film Fixed Resistor Network
- 4920-01-076-5238 MPN 320AS151-1Frame Assembly Tiedown
- 4820-01-085-9166 MPN 1212AS105-2Fluid Pressure Regulating Valve
- 5935-01-182-6800 MPN 1164AS526-5Electrical Connector Backshell
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-246-3839 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
58A117-B2 | Naval Air Systems Command |
58A117-B2 | Naval Air Systems Command |
58A117-B2 | Naval Air Systems Command |
58A117-B2 | Naval Air Systems Command |
58A117-B2 | Naval Air Systems Command |
58A117-B2 | Naval Air Systems Command |
58A117-B2 | Naval Air Systems Command |
58A117-B2 | Naval Air Systems Command |
58A117-B2 | Naval Air Systems Command |