NSN 5306-01-247-0594
Close Tolerance Hex Head Bolt
Between 0.829 inches and 0.859 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS1225C6 for national stock number 5306012470594.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-247-0594.
-
MPN or Model
NAS1225C6
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 0.829 inches and 0.859 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Locking Feature
Patch threads or pellet threads or strip threads -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Plastic polyamide locking feature -
Material Specification
Ams 5735 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1225 professional/industrial association standard
More from these suppliers
- 5940-00-827-6553 MPN NAS1063A9-1Terminal Board Marker Strip
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-001-4017 MPN NAS1352-3LE8PSocket Head Cap Screw
- 5305-00-008-5897 MPN NAS1102C5-14Machine Screw
- 5305-00-038-2431 MPN NAS514P632-22Machine Screw
- 5305-00-051-3614 MPN NAS1351-4-8PSocket Head Cap Screw
- 5305-00-052-2234 MPN MS24667-76Socket Head Cap Screw
- 5305-00-057-0527 MPN MS51958-31Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-247-0594 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1225C6 | National Aerospace Standards |