NSN 5306-01-247-0595
Close Tolerance Hex Head Bolt
Between 5.563 inches and 5.593 inches fastener length, undercut hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number NAS1226C80 for national stock number 5306012470595.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-247-0595.
-
MPN or Model
NAS1226C80
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 5.563 inches and 5.593 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 4.990 inches and 5.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams5732 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1226 professional/industrial association standard
More from these suppliers
- 5305-00-057-0528 MPN MS51958-46Machine Screw
- 5305-00-058-9359 MPN MS51977-10Setscrew
- 5305-00-086-6993 MPN MS27039-5-14Machine Screw
- 5305-00-107-9231 MPN NAS1134V54Close Tolerance Screw
- 5305-00-128-6403 MPN NAS1352C06-4Socket Head Cap Screw
- 5305-00-151-5680 MPN NAS1218-08-9TMachine Screw
- 5305-00-205-3671 MPN NAS1635-02LE10Socket Head Cap Screw
- 5305-00-338-1284 MPN NAS1351-3LE8Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-247-0595 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1226C80 | National Aerospace Standards |