NSN 5306-01-247-3502
Close Tolerance Hex Head Bolt
Between 6.410 inches and 6.611 inches fastener length, hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: 1.050 inches .
Manufacturer part number NAS6210-96D for national stock number 5306012473502.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-247-3502.
-
MPN or Model
NAS6210-96D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.626 inches -
Fastener Length
Between 6.410 inches and 6.611 inches -
Head Style
Hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
1.050 inches -
Grip Diameter
Between 0.6120 inches and 0.6150 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 5.990 inches and 6.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Minimum Yield Strength
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-c-320, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6210-96d professional/industrial association standard
More from these suppliers
- 5940-00-681-9573 MPN 191-10Terminal Board
- 1560-01-572-8717 MPN L3003941-031Aircraft Access Door
- 5935-01-597-0333 MPN E0165D20A01XSpec Connector Rect
- 5305-00-005-8227 MPN MS35307-302Hexagon Head Cap Screw
- 5305-00-007-6174 MPN NAS1100E00-10Machine Screw
- 5305-00-052-6364 MPN NAS1633-5DMachine Screw
- 5305-00-057-0529 MPN NASM51958Machine Screw
- 5305-00-067-3863 MPN NAS1189-3P7LSocket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-247-3502 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6210-96D | National Aerospace Standards |