NSN 5306-01-247-6819
Wheel Bolt
Between 0.928 inches and 0.948 inches fastener length, hexagon head style, between 0.178 inches and 0.198 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS9583-13 for national stock number 5306012476819.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-247-6819.
-
MPN or Model
MS9583-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.620 inches and 0.700 inches -
Fastener Length
Between 0.928 inches and 0.948 inches -
Head Style
Hexagon -
Head Height
Between 0.178 inches and 0.198 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Hole Diameter
0.047 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.248 inches and 0.308 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon longitudinal hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-052-2437 MPN MS25344-1Sensitive Switch
- 5935-00-067-6703 MPN MS27293-5Electrical Connector Cover
- 5935-00-081-5945 MPN MS3101R28-21SZCElectrical Plug Connector
- 5935-00-180-3849 MPN MS27508E16B35PPElectrical Receptacle Connector
- 5940-00-232-4337 MPN MS18029-2S-6Terminal Board Cover
- 5905-00-279-2647 MPN MS35044-14Composition Fixed Resistor
- 5945-00-283-6538 MPN MS25035-156Electromagnetic Relay
- 5935-00-410-0196 MPN MS3476L22-41SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-247-6819 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9583-13 | Military Standards |