NSN 5306-01-247-7607
Coaxial Connector
Between 1.3505 inches and 1.4005 inches fastener length, double hexagon w/hole head style, between 0.494 inches and 0.514 inches head height, width between flats: between 0.637 inches and 0.651 inches .
Manufacturer part number BACB30NH8U9 for national stock number 5306012477607.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-247-7607.
-
MPN or Model
BACB30NH8U9
-
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.813 inches -
Fastener Length
Between 1.3505 inches and 1.4005 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.494 inches and 0.514 inches -
Width Between Flats
Between 0.637 inches and 0.651 inches -
Extended Washer Diameter
Between 0.818 inches and 0.828 inches -
Extended Washer Thickness
Between 0.113 inches and 0.133 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
0.4990 inches -
End Application
Used on sentry f22 aircraft -
Thread Diameter
0.5000 inches -
Grip Length
Between 0.5525 inches and 0.5725 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Part Name Assigned By Controlling Agency
Bolt -
Material Specification
Ams5629 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 cl 220fc6 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-600-9481 MPN PMT1153-7Close Tolerance Screw
- 5306-00-177-5506 MPN MS21250-0648Shear Bolt
- 5306-00-616-2262 MPN 3M33-4-11AClose Tolerance Bolt
- 5306-01-165-8613 MPN BACB30NE5-17Shear Bolt
- 5306-01-167-6314 MPN LD111-0021-0409Shear Bolt
- 5306-01-194-9182 MPN VCD0004-4-FS8Shear Bolt
- 5306-01-332-3143 MPN VAL23009-5-024Shear Bolt
- 5306-01-332-6490 MPN VCD0020-8-D16Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-247-7607 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NH8U9 | Valley-todeco, Inc. |
BACB30NH8U9 | Sps Technologies, Llc |
BACB30NH8U9 | Sps Technologies, Llc |
BACB30NH8U9 | Alcoa Global Fasteners, Inc. |
BACB30NH8U9 | Sps Technologies, Llc |