NSN 5306-01-248-4471
Coaxial Connector
Between 0.972 inches and 1.002 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS1954C9 for national stock number 5306012484471.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-248-4471.
-
MPN or Model
NAS1954C9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 0.972 inches and 1.002 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1954 professional/industrial association standard
More from these suppliers
- 5305-00-007-3020 MPN NAS1102E02-4PMachine Screw
- 5305-00-054-9242 MPN NASM24694-C101Machine Screw
- 5305-00-126-5148 MPN MS27039DD0823Machine Screw
- 5305-00-206-2508 MPN MS35215-53Machine Screw
- 5305-00-207-3740 MPN NAS517-5-9Machine Screw
- 5305-00-224-1002 MPN NAS1221-3-9PMachine Screw
- 5305-00-415-2081 MPN NAS1101-3H5Machine Screw
- 5305-00-452-4755 MPN NAS1578V3H4Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-248-4471 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1954C9 | National Aerospace Standards |
Stock Check
- NS: 9
- NE: 1779