NSN 5306-01-250-7951
Coaxial Connector
Between 3.610 inches and 3.640 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6205-51 for national stock number 5306012507951.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-250-7951.
-
MPN or Model
NAS6205-51
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 3.610 inches and 3.640 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 3.177 inches and 3.197 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium or chromate -
Thread Series Designator
Unjf -
Specification Data
80205-nas6205 professional/industrial association standard
More from these suppliers
- 5935-01-406-9472 MPN NAS1653-12B10SNElectrical Plug Connector
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 1560-01-423-0218 MPN NAS6808D39Aircraft Structural Component Support
- 5305-00-052-4045 MPN NAS1081-5A8Setscrew
- 5305-00-052-6889 MPN MS35198-50Machine Screw
- 5305-00-052-7004 MPN MS21295-36Socket Head Cap Screw
- 5305-00-058-4099 MPN NAS1190-06T8LSocket Head Cap Screw
- 5305-00-060-7667 MPN NAS1153-2Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-250-7951 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-51 | National Aerospace Standards |