NSN 5306-01-250-9214
Close Tolerance Hex Head Bolt
Between 0.891 inches and 0.911 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number AIC687-3-10 for national stock number 5306012509214.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-250-9214.
-
MPN or Model
AIC687-3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.256 inches and 0.296 inches -
Fastener Length
Between 0.891 inches and 0.911 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2912 MPN LS15264V3-8Machine Screw
- 5305-01-004-9528 MPN ST3M557-3-3Close Tolerance Screw
- 5305-01-481-9469 MPN 3M1170V4-2AClose Tolerance Screw
- 5305-01-512-8299 MPN 3M1170D6-18AClose Tolerance Screw
- 5306-00-092-6833 MPN VFK100G-06017Shear Bolt
- 5306-00-317-4378 MPN STSBG004A06U014Shear Bolt
- 5306-00-928-9592 MPN VEP220121-4FH4Shear Bolt
- 5306-01-011-4037 MPN VAL23033-4H5Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-250-9214 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC687-3-10 | Sps Technologies, Llc |
ST3M744-3-10 | Boeing Company, The |
VS3174-3-10 | Arconic Global Fasteners & Rings, |
11823-3-10 | Reid Products Inc. |
VCG0001-3-10 | Valley-todeco, Inc. |
PBF1265-3-10 | Sps Technologies, Llc |
MB154-3-10 | Hi-shear Corporation |
122895-3-10 | Sps Technologies, Llc |
MB154-3-10 | Lisi Aerospace Canada Corp |
S406-3-10 | Huck Intl Inc |
VS3174-3-10 | Alcoa Global Fasteners, Inc. |