NSN 5306-01-251-0911
Coaxial Connector
Between 1.516 inches and 1.562 inches fastener length, crowned hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number K616368-11 for national stock number 5306012510911.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-251-0911.
-
MPN or Model
K616368-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.385 inches -
Fastener Length
Between 1.516 inches and 1.562 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.359 inches first hole and 1.391 inches first hole -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-229-3573 MPN K653705-1Directio Crank Assy
- 1560-01-205-3030 MPN A51B97122-11Rudder Fairing
- 1560-01-273-1745 MPN A51B52112-80Airfoil Rib
- 4920-01-332-8534 MPN K604722-105Test Adapter Kit
- 1560-01-473-5949 MPN K836773-001Aircraft Structural Panel
- 5306-01-161-8364 MPN 3283537-3Eyebolt Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-251-0911 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
K616368-11 | Kaman Aerospace Corporation |