NSN 5306-01-251-2916
Close Tolerance Hex Head Bolt
Between 3.515 inches and 3.562 inches fastener length, undercut hexagon head style, between 0.390 inches and 0.422 inches head height, width between flats: between 1.053 inches and 1.066 inches .
Manufacturer part number AN182H33A for national stock number 5306012512916.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-251-2916.
-
MPN or Model
AN182H33A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.061 inches and 1.140 inches -
Fastener Length
Between 3.515 inches and 3.562 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.390 inches and 0.422 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.7481 inches and 0.7488 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 2.422 inches and 2.454 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-222-0321 MPN AN5548-1Lug Terminal
- 5935-00-241-5502 MPN AN3106A36-13SElectrical Plug Connector
- 5935-00-259-5970 MPN AN3108B20-4PElectrical Plug Connector
- 5935-00-636-5704 MPN AN3106E28-21SWElectrical Plug Connector
- 5305-00-151-2823 MPN AN510B6R4Machine Screw
- 5305-00-156-2423 MPN AN507-428R26Machine Screw
- 5305-00-276-1758 MPN AN500AMachine Screw
- 5305-00-281-8473 MPN AN520DD10R14Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-251-2916 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN182H33A | Aeronautical Standards Group |