NSN 5306-01-253-1611
Wheel Bolt
Between 0.970 inches and 1.000 inches fastener length, distorted head head style, between 0.281 inches and 0.291 inches head height, width between flats: between 0.612 inches and 0.625 inches .
Manufacturer part number MS35764-848 for national stock number 5306012531611.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-253-1611.
-
MPN or Model
MS35764-848
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.827 inches and 1.000 inches -
Fastener Length
Between 0.970 inches and 1.000 inches -
Head Style
Distorted head -
Head Height
Between 0.281 inches and 0.291 inches -
Width Between Flats
Between 0.612 inches and 0.625 inches -
Locking Feature
Distortions head -
Thread Diameter
0.438 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 8 assn standard all material responses -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-012-0942 MPN MS17143-18Lug Terminal
- 5935-00-057-5274 MPN MS3116F20-16SXElectrical Plug Connector
- 5940-00-082-4642 MPN MS18029-1S11Terminal Board Cover
- 5940-00-115-0775 MPN MS20659-147Lug Terminal
- 5935-00-162-1561 MPN MS17340N17A1Electrical Connector Backshell
- 5930-00-191-6133 MPN MS24612L302Toggle Switch
- 5935-00-194-3079 MPN M641-3-2Telephone Jack
- 5935-00-222-5632 MPN MS3100A10S2SElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-253-1611 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35764-848 | Military Standards |