NSN 5306-01-253-2239
Externally Relieved Body Bolt
Between 2.512 inches and 2.542 inches fastener length, tee no. 2 head style, between 2.110 inches and 2.150 inches head height, head length: 2.500 inches .
Manufacturer part number 863C0120050-003 for national stock number 5306012532239.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-01-253-2239.
-
MPN or Model
863C0120050-003
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.808 inches -
Fastener Length
Between 2.512 inches and 2.542 inches -
Head Style
Tee no. 2 -
Head Height
Between 2.110 inches and 2.150 inches -
Head Length
2.500 inches -
Err Default
Err default -
Width Between Flats
1.890 inches -
Hole Diameter
Between 0.249 inches and 0.256 inches -
Point Length
0.030 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
First Diameter From Head
Between 0.623 inches and 0.625 inches -
Second Diameter From Head
0.417 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
1.625 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
1.719 inches -
Point Style
Flat -
Thread Diameter
0.500 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Hole Configuration Style
Square longitudinal hole -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.120 inches first hole -
Externally Relieved Body Diameter Quantity
2 -
Point Chamfer Angle
45.0 degrees -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-250-6125 MPN ST81D202SJJEJWElectrical Connector Backshell
- 6145-01-243-6585 MPN STM E751-14-9Electrical Wire
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-01-253-2239 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
863C0120050-003 | Lockheed Martin Corporation |