NSN 5306-01-255-1029
Close Tolerance Hex Head Bolt
Between 0.881 inches and 0.928 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number ST3M747-4-8 for national stock number 5306012551029.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-255-1029.
-
MPN or Model
ST3M747-4-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.471 inches and 0.538 inches -
Fastener Length
Between 0.881 inches and 0.928 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Head Minor Diameter
Between 0.448 inches and 0.455 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.390 inches and 0.410 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-175-9235 MPN VFQ402-13Hexagon Head Cap Screw
- 5305-01-435-3022 MPN BACB30LU6-22Close Tolerance Screw
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-512-8364 MPN 3M1170C4-18AClose Tolerance Screw
- 5305-01-600-8399 MPN PMT8704A6Close Tolerance Screw
- 5305-01-660-8842 MPN LD111-0046-2313Close Tolerance Screw
- 5306-00-955-8209 MPN VFK100G-05010Shear Bolt
- 5306-01-033-2663 MPN BACB30NE6H6Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-255-1029 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M747-4-8 | Boeing Company, The |
S397-4-8 | Huck International, Inc. |
11833-4-8 | Reid Products Inc. |
VCG0002-4-8 | Valley-todeco, Inc. |
AIC688-4-8 | Sps Technologies, Llc |
PBF1266-4-8 | Sps Technologies, Llc |
VS3191-4-8 | Alcoa Global Fasteners, Inc. |
MB155-4-8 | Hi-shear Corporation |
122896-4-8 | Sps Technologies, Llc |
MB155-4-8 | Lisi Aerospace Canada Corp |
S397-4-8 | Huck Intl Inc |
VS3191-4-8 | Arconic Global Fasteners & Rings, |
GS1031-4-8 | B & B Specialties Inc. |
ST3M747-4-8 | Heartland Precision Fasteners, Inc. |