NSN 5306-01-256-4464
Close Tolerance Hex Head Bolt
Between 1.620 inches and 1.667 inches fastener length, double hexagon head style, between 0.318 inches and 0.338 inches head height, width between flats: between 0.741 inches and 0.865 inches .
Manufacturer part number MB145-9D18 for national stock number 5306012564464.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-256-4464.
-
MPN or Model
MB145-9D18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
Between 1.620 inches and 1.667 inches -
Head Style
Double hexagon -
Head Height
Between 0.318 inches and 0.338 inches -
Width Between Flats
Between 0.741 inches and 0.865 inches -
Grip Diameter
Between 0.5610 inches and 0.5615 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.146 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.486 inches first hole and 1.553 inches first hole -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5305-01-497-0842 MPN 3M1170C3-9AClose Tolerance Screw
- 5306-00-205-3700 MPN BACB30MF6-18Close Tolerance Bolt
- 5306-00-514-7739 MPN VEP220555-5-17Machine Bolt
- 5306-01-025-6434 MPN VAL23029-4-18Close Tolerance Bolt
- 5306-01-132-4356 MPN GB511GF4-9Shear Bolt
- 5306-01-141-7883 MPN VAL23608-6-40Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-256-4464 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MB145-9D18 | Hi-shear Corporation |
MB145-9D18 | Lisi Aerospace Canada Corp |
ST3M729-9D18 | Arconic Global Fasteners & Rings, |
ST3M729-9D18 | Heartland Precision Fasteners, Inc. |
ST3M729-9D18 | Huck International, Inc. |
ST3M729-9D18 | Devine Mfg Co |
ST3M729-9D18 | Fastener Innovation Technology, Inc. |
ST3M729-9D18 | Sps Technologies, Llc |
ST3M729-9D18 | Valley-todeco, Inc. |
ST3M729-9D18 | Sps Technologies, Llc |
ST3M729-9D18 | Alcoa Global Fasteners, Inc. |
ST3M729-9D18 | Boeing Company, The |
ST3M729-9D18 | Huck Intl Inc |