NSN 5306-01-256-6851
Coaxial Connector
Between 3.044 inches and 3.074 inches fastener length, dished hexagon head style, between 0.500 inches and 0.515 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number NAS1966C28 for national stock number 5306012566851.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-256-6851.
-
MPN or Model
NAS1966C28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.284 inches and 1.334 inches -
Fastener Length
Between 3.044 inches and 3.074 inches -
Head Style
Dished hexagon -
Head Height
Between 0.500 inches and 0.515 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Thread Diameter
1.000 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-454-0311 MPN NAS1063A6-510ALTerminal Board Marker Strip
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-007-3019 MPN NAS1102E02-3PMachine Screw
- 5305-00-051-2327 MPN MS51958-96Machine Screw
- 5305-00-059-8248 MPN MS35214-23Machine Screw
- 5305-00-068-5415 MPN MS16995-20Socket Head Cap Screw
- 5305-00-069-5600 MPN MS51958-34Machine Screw
- 5305-00-151-0135 MPN MILS7839Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-256-6851 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1966C28 | National Aerospace Standards |