NSN 5306-01-260-0436
Close Tolerance Hex Head Bolt
With retaining ring on shank.
Manufacturer part number MS27576-4-64 for national stock number 5306012600436.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-260-0436.
-
MPN or Model
MS27576-4-64
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.402 inches and 0.438 inches -
Fastener Length
Between 4.418 inches and 4.438 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 4.000 inches and 4.016 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.318 inches first hole and 4.348 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-01-400-4025 MPN 2269-006Pressure Switch
- 5935-01-646-7803 MPN NASM21250-08022Electrical Receptacle Connector
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5305-00-007-0208 MPN NAS1100E00-5Machine Screw
- 5305-00-007-0281 MPN NAS1100C08-8PMachine Screw
- 5305-00-007-1587 MPN NAS1102C02-5PMachine Screw
- 5305-00-043-1847 MPN NAS1352-12LN32PSocket Head Cap Screw
- 5305-00-052-8902 MPN MS24630-56Tapping Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-260-0436 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-4-64 | National Aerospace Standards |
MS27576-4-64 | Military Standards |