NSN 5306-01-261-0803
Close Tolerance Hex Head Bolt
With retaining ring on shank.
Manufacturer part number MS27576-10-68 for national stock number 5306012610803.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-261-0803.
-
MPN or Model
MS27576-10-68
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.833 inches and 0.869 inches -
Fastener Length
Between 5.099 inches and 5.119 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.313 inches and 0.328 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6232 inches and 0.6241 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 4.250 inches and 4.266 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.974 inches first hole and 5.004 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5935-01-613-0211 MPN MS31081R-22-10SElectrical Plug Connector
- 5305-00-059-3660 MPN NASM51958Machine Screw
- 5305-00-061-0224 MPN NAS608C4H9Socket Head Cap Screw
- 5305-00-061-5019 MPN NAS1206-26Close Tolerance Screw
- 5305-00-069-5571 MPN MS90725-83Hexagon Head Cap Screw
- 5305-00-104-5096 MPN NAS1635-08LE4Socket Head Cap Screw
- 5305-00-127-7515 MPN NAS1352C3LL8Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-261-0803 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-10-68 | National Aerospace Standards |
MS27576-10-68 | Military Standards |