NSN 5306-01-261-1871
Coaxial Connector
3.069 inches fastener length, double hexagon w/hole head style, between 0.798 inches and 0.810 inches head height, width between flats: between 0.934 inches and 0.943 inches .
Manufacturer part number NAS634-30 for national stock number 5306012611871.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-261-1871.
-
MPN or Model
NAS634-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.194 inches -
Fastener Length
3.069 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.798 inches and 0.810 inches -
Width Between Flats
Between 0.934 inches and 0.943 inches -
Extended Washer Diameter
Between 1.428 inches and 1.438 inches -
Extended Washer Thickness
Between 0.188 inches and 0.208 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Thread Diameter
0.8750 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas634 professional/industrial association standard
More from these suppliers
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-051-9135 MPN NASM51958Machine Screw
- 5305-00-052-6881 MPN MS24627-63Tapping Screw
- 5305-00-052-7423 MPN MS35198-90Machine Screw
- 5305-00-143-2328 MPN MS51045-51Setscrew
- 5305-00-174-0619 MPN NAS200-632BC8Machine Screw
- 5305-00-206-3778 MPN NAS336P12Close Tolerance Screw
- 5305-00-207-0745 MPN NAS220-33Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-261-1871 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS634-30 | National Aerospace Standards |