NSN 5306-01-263-9144
Coaxial Connector
Between 3.479 inches and 3.609 inches fastener length, hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS1305-50D for national stock number 5306012639144.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-263-9144.
-
MPN or Model
NAS1305-50D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 3.479 inches and 3.609 inches -
Head Style
Hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 3.115 inches and 3.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 40.0 rockwell c -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1305-50d professional/industrial association standard
More from these suppliers
- 5935-01-108-1815 MPN MS3476L16-26PNElectrical Plug Connector
- 5940-01-384-0650 MPN NAS1063A20-3MLSTerminal Board Marker Strip
- 5940-01-413-3011 MPN NAS1063B219-222Terminal Board Marker Strip
- 5305-00-053-1117 MPN MS24621-16Tapping Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-143-1329 MPN NASM7838Machine Screw
- 5305-00-269-3206 MPN MS90725-55Hexagon Head Cap Screw
- 5305-00-420-6456 MPN NAS1133V2Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-263-9144 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1305-50D | National Aerospace Standards |